近五年代表性论文
论文名称 | 发表期刊 | 发表时间 | 作者 |
Determination of pressure drop for air flow through sintered metal porous media using a modified Ergun equation | ADVANCED POWDER TECHNOLOGY | 2016 | 钟伟 |
Dispersion stability and thermophysical properties of environmentally friendly graphite oil-based nanofluids used in machining | ADVANCES IN MECHANICAL ENGINEERING | 2016 | 苏宇 |
Measurement of the moment of inertia for a zero turning radius mower | APPLIED ENGINEERING IN AGRICULTURE | 2016 | 王新彦 |
The influence of the lift angle on the center of gravity: measurements for zero turning radius mowers | APPLIED ENGINEERING IN AGRICULTURE | 2016 | 王新彦 |
Numerical simulation and pattern characterization of nonlinear spatiotemporal dynamics on fractal surfaces for the whole-heart modeling applications | EUROPEAN PHYSICAL JOURNAL B | 2016 | 陈赟 |
Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2016 | 苏宇 |
Locomotion system design and dynamics analysis of a new telescopic miniature in-pipe robot | INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION | 2016 | 朱永梅 |
Theoretical and experimental investigation on optimization of a noncontact air conveyor | JOURNAL OF CENTRAL SOUTH UNIVERSITY | 2016 | 钟伟 |
The effect of oscillating flow on a horizontal dilute-phase pneumatic conveying | PARTICULATE SCIENCE AND TECHNOLOGY | 2016 | 晏飞 |
Investigation into the role of cooling/lubrication effect of cryogenic minimum quantity lubrication in machining of AISI H13 steel by three-dimensional finite element method | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2016 | 苏宇 |
Study on the basic characteristics of a contactless air film conveyor using viscous traction | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2016 | 钟伟 |
A Novel Information-Theoretic Approach for Variable Clustering and Predictive Modeling Using Dirichlet Process Mixtures | SCIENTIFIC REPORTS | 2016 | 陈赟 |
Investigation on egg-shaped pressure hulls | MARINE STRUCTURES | 2017 | 张建 |
Buckling of bi-segment spherical shells under hydrostatic external pressure | THIN-WALLED STRUCTURES | 2017 | 张建 |
Buckling of prolate egg-shaped domes under hydrostatic external pressure | THIN-WALLED STRUCTURES | 2017 | 张建 |
Buckling of egg-shaped shells subjected to external pressure | THIN-WALLED STRUCTURES | 2017 | 张建 |
Buckling of spherical shells subjected to external pressure: A comparison of experimental and theoretical data | THIN-WALLED STRUCTURES | 2017 | 张建 |
An intelligent wheel position searching algorithm for cutting tool grooves with diverse machining precision requirements | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2017 | 李国超 |
Multi-scale analysis on particle dynamics of a horizontal self-excited pneumatic conveying at the minimum pressure drop | ADVANCED POWDER TECHNOLOGY | 2017 | 晏飞 |
Opening reinforcement design and buckling of spherical shell subjected to external pressure | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2017 | 朱永梅 |
An investigation on the electrostatic atomization mode of nanofluid using cutting tool as electrode | ADVANCES IN MECHANICAL ENGINEERING | 2017 | 苏宇 |
Study on the basic characteristics of a noncontact air conveyor for large glass sheets | ADVANCES IN MECHANICAL ENGINEERING | 2017 | 钟伟 |
Experimental Study on the Geometrical and Mechanical Properties of Goose Eggshells | BRAZILIAN JOURNAL OF POULTRY SCIENCE | 2017 | 张建 |
Research on rheological and flow behavior of lubricating grease in extremely cold weather | Industrial Lubrication and Tribology | 2017 | 晏飞 |
A flexible process information reuse method for similar machining feature | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017 | 刘金锋 |
A new algorithm to solve the grinding wheel profile for end mill groove machining | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017 | 李国超 |
Modeling and verification of a contactless air film conveyor using a viscous traction principle | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2017 | 钟伟 |
Effects of injection pressure on cavitation and spray in marine diesel engine | INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS | 2017 | 晏飞 |
Effects of concentrated rigid inclusions defects on the in-plane impact behavior of hexagonal honeycombs | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2017 | 何强 |
A Study of Polycrystalline Silicon Damage Features Based on Nanosecond Pulse Laser Irradiation with Different Wavelength Effects | MATERIALS | 2017 | 徐江敏 |
Study on the Tribological Properties of Porous Titanium Sliding against Tungsten Carbide YG6 | METALS | 2017 | 刘志强 |
One-Dimensional Constitutive Model for Porous Titanium Alloy at Various Strain Rates and Temperatures | METALS | 2017 | 刘志强 |
Numerical Analysis on Chaotic Vibration of Drive System for a Movable Tooth Piezoelectric Motor | SHOCK AND VIBRATION | 2017 | 李冲 |
Experimental study on puffing and evaporation characteristics of jatropha straight vegetable oil (SVO) droplets | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2018 | 王筱蓉 |
Linear and nonlinear elastic buckling of stereolithography resin egg-shaped shells subjected to external pressure | THIN-WALLED STRUCTURES | 2018 | 张建 |
Elastic buckling of externally pressurized Cassini oval shells with various shape indices | THIN-WALLED STRUCTURES | 2018 | 张建 |
Buckling of externally pressurised egg-shaped shells with variable and constant wall thicknesses | THIN-WALLED STRUCTURES | 2018 | 张建 |
Buckling of externally pressurized cylindrical shell: A comparison of theoretical and experimental data | THIN-WALLED STRUCTURES | 2018 | 朱永梅 |
Development of prediction models of running-in attractor | TRIBOLOGY INTERNATIONAL | 2018 | 周元凯 |
Elastic-plastic buckling of deep sea spherical pressure hulls | MARINE STRUCTURES | 2018 | 张建 |
Buckling of longan-shaped shells under external pressure | MARINE STRUCTURES | 2018 | 张建 |
Characterization of running-in attractors reconstructed from friction signals | FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY | 2018 | 周元凯 |
Buckling and strength of an externally pressurized spherical shell with reinforced opening | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2018 | 朱永梅 |
A new method of reusing the manufacturing information for the slightly changed 3D CAD model | JOURNAL OF INTELLIGENT MANUFACTURING | 2018 | 刘金锋 |
Numerical analysis and optimal design of the breechblock mechanism | ADVANCES IN MECHANICAL ENGINEERING | 2018 | 朱永梅 |
Frequency Sensitivity and Mode Characteristics of Body Structure for a Piezoelectric-Based UUV | APPLIED SCIENCES-BASEL | 2018 | 李冲 |
Determination of Permeability and Inertial Coefficients of Sintered Metal Porous Media Using an Isothermal Chamber | APPLIED SCIENCES-BASEL | 2018 | 钟伟 |
A new approach for predicting wear overlap geometry in ball end finish milling | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018 | 程德俊 |
Modeling of integral cutting tool grooves using envelope theory and numerical methods | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018 | 李国超 |
Influence of cutting and clamping forces on machining distortion of diesel engine connecting rod | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018 | 周宏根 |
Effects of nonlinear axial forces on chaotic vibration for a mesh-type harmonic piezoelectric motor | INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS | 2018 | 李冲 |
Design and mechanical analysis of a mesh-type rotary harmonic piezoelectric motor | INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS | 2018 | 李冲 |
Nonlinear dynamics of a piezoelectric precision drive system used for robot joint | INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS | 2018 | 李冲 |
Fuzzy Adaptive Sliding Mode Control for the Precision Position of Piezo-Actuated Nano Positioning Stage | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2018 | 方记文 |
Numerical study on the dynamic behavior of circular honeycomb structure with concentrated filling inclusions defects | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2018 | 何强 |
Dynamic optimization of an electromechanical integrated harmonic piezoelectric motor | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2018 | 李冲 |
System Dependence of Running-In Attractor Derived From Lubricated Sliding Contact of Steel Alloys 52100 and 1045 | JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2018 | 周元凯 |
Multifractal analysis of three-dimensional surface topographies of GCr15 steel and H70 brass during wear process | MEASUREMENT | 2018 | 左雪 |
Development of a Contactless Air Conveyor System for Transporting and Positioning Planar Objects | MICROMACHINES | 2018 | 钟伟 |
Experimental investigation of porous metal materials in high-speed micro-milling process | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2018 | 刘志强 |
Modeling and analysis of variable-core groove for integral cutting tools | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING | 2018 | 李国超 |
Effect of thickness on the buckling strength of egg-shaped pressure hulls | SHIPS AND OFFSHORE STRUCTURES | 2018 | 张建 |
Buckling of stainless steel spherical caps subjected to uniform external pressure | SHIPS AND OFFSHORE STRUCTURES | 2018 | 张建 |
Wear Performance of Phenolic Composites: A Comparison of Experimental and Theoretical Data | TRIBOLOGY TRANSACTIONS | 2018 | 朱永梅 |
Experimental investigation on the evaporation and micro-explosion mechanism of jatropha vegetable oil (JVO) droplets | FUEL | 2019 | 王筱蓉 |
Effect of ceria concentrations on the evaporation characteristic of diesel fuel droplets | FUEL | 2019 | 王筱蓉 |
Incipient wear fault diagnosis using a modified change detection method | TRIBOLOGY INTERNATIONAL | 2019 | 周元凯 |
Elastic buckling of externally pressurized Cassini oval shells with various shape indices | THIN-WALLED STRUCTURES | 2019 | 张建 |
Buckling of externally pressurised egg-shaped shells with variable and constant wall thicknesses | THIN-WALLED STRUCTURES | 2019 | 张建 |
Buckling of externally pressurised spherical caps with wall-thickness reduction | THIN-WALLED STRUCTURES | 2019 | 张建 |
A numerical study on the in-plane dynamic crushing of self-similar hierarchical honeycombs | MECHANICS OF MATERIALS | 2019 | 何强 |
Elastic-plastic buckling of deep sea spherical pressure hulls | MARINE STRUCTURES | 2019 | 张建 |
Buckling of longan-shaped shells under external pressure | MARINE STRUCTURES | 2019 | 张建 |
Effect of nanoparticles concentration on the evaporation characteristics of biodiesel | APPLIED SURFACE SCIENCE | 2019 | 姜根柱 |
A comprehensive review on the properties of nanofluid fuel and its additive effects to compression ignition engines | APPLIED SURFACE SCIENCE | 2019 | 王筱蓉 |
Application of chaos theory to optimize the running-in parameters by using a running-in attractor | WEAR | 2019 | 周元凯 |
Dynamic Evaluation Method of Machining Process Planning Based on Digital Twin | IEEE ACCESS | 2019 | 刘金锋 |
Experimental and numerical study of a horizontal-vertical gas-solid two-phase system with self-excited oscillatory flow | ADVANCED POWDER TECHNOLOGY | 2019 | 晏飞 |
Characterization of running-in attractors reconstructed from friction signals | FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY | 2019 | 周元凯 |
Dynamic identification of wear state based on nonlinear parameters | FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY | 2019 | 左雪 |
Strength and stability of spherical pressure hulls with different viewport structures | INTERNATIONAL JOURNAL OF PRESSURE VESSELS & PIPING | 2019 | 朱永梅 |
Experimental and numerical studies on the buckling of the hemispherical shells made of maraging steel subjected to extremely high external pressure | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2019 | 张建 |
Experimental and numerical collapse properties of externally pressurized egg-shaped shells under local geometrical imperfections | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2019 | 张建 |
Tribological Behavior of Laser Textured Nodular Cast Iron Surface | INDUSTRIAL LUBRICATION AND TRIBOLOGY | 2019 | 朱永梅 |
Study on the constitutive model of porous titanium alloy | EMERGING MATERIALS RESEARCH | 2019 | 刘志强 |
A fractal view on running-in process: taking steel-on-steel tribo-system as an example | INDUSTRIAL LUBRICATION AND TRIBOLOGY | 2019 | 周元凯 |
Reducing the internal compressive stress of the microelectroformed layer by adjusting the current densities | MICRO &NANO LETTERS | 2019 | 赵忠 |
Nonlinear Vibration of a Micro Piezoelectric Precision Drive System | MICROMACHINES | 2019 | 李冲 |
Experimental analysis on particle fluctuation velocity in a horizontal air–solid | PARTICULATE SCIENCE AND TECHNOLOGY | 2019 | 晏飞 |
Fuzzy adaptive multi-mode sliding mode control for precision linear stage based on floating stator | REVIEW OF SCIENTIFIC INSTRUMENTS | 2019 | 方记文 |
Dual-valve parallel prediction control for an electro-hydraulic servo system | SCIENCE PROGRESS | 2019 | 苏世杰 |
Elastic-plastic buckling of externally pressurized hemispherical heads. | SHIPS AND OFFSHORE STRUCTURES | 2019 | 朱永梅 |
Buckling characteristics of externally pressurized toroidal shell | SHIPS AND OFFSHORE STRUCTURES | 2019 | 朱永梅 |
Buckling of stainless steel spherical caps subjected to uniform external pressure | SHIPS AND OFFSHORE STRUCTURES | 2019 | 张建 |
Effect of thickness on the buckling strength of egg shaped pressure hulls | SHIPS AND OFFSHORE STRUCTURES | 2019 | 张建 |
Buckling of an egg-shaped shell with varying wall thickness under uniform external pressure | SHIPS AND OFFSHORE STRUCTURES | 2019 | 张建 |
Buckling of circumferentially corrugated cylindrical shells under uniform external pressure | SHIPS AND OFFSHORE STRUCTURES | 2019 | 张建 |
Effect of geometric and operating parameters on the spray characteristics of an open-end swirl injector | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEER, PART G：JOURNAL OF AEROSPACEENGINEERING | 2019 | 陈晨 |
Biomechanical characteristics of puffer skin for flexible Surface drag reduction | MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2020 | 周宏根 |
Modeling Technology of Curved Surface Development for Puffer fish | ADVANCES IN MECHANICAL ENGINEERING | 2020 | 周宏根 |
Research on the drag reduction property of puffer (Takifugu flavidus) spinal nonsmooth structure surface | MICROSCOPY RESEARCH AND TECHNIQUE | 2020 | 周宏根 |
Electrochemical Coupled Analysis of a Micro Piezo-Driven Focusing Mechanism | MICROMACHINES | 2020 | 李冲 |
A fault diagnosis approach for autonomous underwater vehicle thrusters using time-frequency entropy enhancement and boundary constraint-assisted relative gray relational grade | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING | 2020 | 殷宝吉 |
Fault degree identification method for thruster of autonomous underwater vehicle using homomorphic membership function and low frequency trend prediction | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2020 | 殷宝吉 |
An approach to calculate grinding wheel path for complex end mill groove grinding based on an optimization algorithm | JOURNAL OF MANUFACTURING PROCESSES | 2020 | 李国超 |
Influence of Induction Hardening Process on Camshafts’ Residual Stresses | ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2020 | 李国超 |
Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry | THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2020 | 李国超 |
Convolutional Neural Network Analysis of Recurrence Plots for Anomaly Detection | INTERNATIONAL JOURNAL OF BIFURCATION AND CHAOS | 2020 | 陈赟 |
Multiparametric sensitivity analysis of multilayered filament-wound cylinder under internal pressure | MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2020 | 康超 |
Study on conveying force area of cone-shaped parts in multi-pass hydroforming | JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS | 2020 | 孙志莹 |
Influence of noise on the fractal dimension of measured surface topography | MEASUREMENT | 2020 | 左雪 |
Influence of sampling length on estimated fractal dimension of surface profile | CHAOS, SOLITONS AND FRACTALS | 2020 | 左雪 |
A method to construct a reference model for model reference adaptive control | ADVANCES IN MECHANICAL | 2020 | 苏世杰 |
Parameter optimization for ship antiroll gyros | APPLIED SCIENCES | 2020 | 苏世杰 |
The modelling and using strategy for the digital twin in process planning | INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS | 2020 | 刘金锋 |
Study on the influence of the brazing sheet placement angle on the rotation strength of composite grinding wheel | JOURNAL OF MANUFACTURING PROCESSES | 2020 | 吴恒恒 |
Experimental and numerical buckling analysis of toroidal shell segments under uniform external pressure | THIN-WALLED STRUCTURES | 2020 | 张建 |
Non-linear collapse behavior of externally pressurized resin toroidal and cylindrical shells: numerical and experimental studies | SHIPS AND OFFSHORE STRUCTURES | 2020 | 张建 |
Study on dented hemispheres under external hydrostatic pressure | MARINE STRUCTURES | 2020 | 张建 |
Collapse performance of externally pressurized resin egg-shaped shells with corrosion thinning | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2020 | 张建 |
Calculation of coating consumption quota | JOURNAL OF COATINGS TECHNOLOGY AND | 2020 | 卜赫男 |
Experimental study on the failure modes of circumferentially corrugated cylinders under external hydrostatic pressure | THIN-WALLED STRUCTURES | 2020 | 唐文献 |
Buckling characteristics of externally pressurized toroidal shell | SHIPS AND OFFSHORE STRUCTURES | 2020 | 朱永梅 |
Buckling of Externally Pressurized Toroidal Shell With Stiffened Ribs | JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME | 2020 | 朱永梅 |
Interaction of Surface Cracks on an Egg-shaped Pressure Shell | ARCHIVE OF APPLIED MECHANICS | 2020 | 朱永梅 |
Buckling of externally pressurized corroded spherical shells with wall-thickness reduction in local region | INTERNATIONAL JOURNAL OF PRESSURE VESSELS & PIPING | 2020 | 朱永梅 |
A numerical study on the in-plane dynamic crushing of self-similar hierarchical honeycombs | MECHANICS OF MATERIALS | 2020 | 何强 |
Mechanical properties of spider-web hierarchical honeycombs subjected to out-of-plane impact loading | JOURNAL OF SANDWICH STRUCTURES AND MATERIALS | 2020 | 何强 |
Numerical study on the dynamic behavior of circular honeycomb structure with concentrated filling inclusions defects | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2020 | 何强 |
Enhancement of Liquid-Solid Two-Phase Flow Through a Vertical Swirling pipe | JOURNAL OF APLIED FLUID MECHANICS, | 2020 | 晏飞 |
An experimental study on a | ADVANCED POWDER TECHNOLOGY | 2020 | 晏飞 |
Investigation of the Spray Formation and Breakup process in an Open -end Swirl Injector | SCIENCE PROGRESS | 2020 | 陈晨 |
A Vehicle-Environment Cooperative Control Based Velocity Profile Prediction Method and Case Study in Energy Management of Plug-in Hybrid Electric Vehicles | IEEE ACCESS | 2020 | 张思 |
